ECMM, DOCSIS 3.0, 1xGE, MCX/SMB/MMCX, DV110IE
Nkọwa dị mkpirikpi:
The MoreLink's DV110IE bụ DOCSIS 3.0 ECMM Module (Embedded Cable Modem Module) na-akwado ruo 8 downstream na 4 ọwa jikọtara ọnụ iji wepụta ahụmịhe ịntanetị dị elu dị elu.
The DV110IE bụ okpomọkụ obi tara mmiri maka mwekota na ndị ọzọ na ngwaahịa na-chọrọ na-arụ ọrụ na n'èzí ma ọ bụ oké okpomọkụ gburugburu ebe obibi.
Nkọwa ngwaahịa
Mkpado ngwaahịa
Nkọwa ngwaahịa
The MoreLink's DV110IE bụ DOCSIS 3.0 ECMM Module (Embedded Cable Modem Module) na-akwado ruo 8 downstream na 4 ọwa jikọtara ọnụ iji wepụta ahụmịhe ịntanetị dị elu dị elu.
The DV110IE bụ okpomọkụ obi tara mmiri maka mwekota na ndị ọzọ na ngwaahịa na-chọrọ na-arụ ọrụ na n'èzí ma ọ bụ oké okpomọkụ gburugburu ebe obibi.
Dabere na ọrụ Full Band Capture (FBC), DV110IE abụghị naanị USB Modem, kamakwa enwere ike iji ya dị ka ihe nyocha Spectrum.
Heatsink bụ iwu na ngwa kpọmkwem.A na-enye oghere PCB atọ gburugburu CPU, nke mere na enwere ike ịtinye ihe nkwado heatsinking ma ọ bụ ngwaọrụ yiri ya na PCB, iji nyefee okpomọkụ a na-emepụta na CPU na n'ebe obibi na gburugburu ebe obibi.
Nkọwapụta ngwaahịa a na-ekpuchi DOCSIS®na EuroDOCSIS®Ụdị 3.0 nke usoro ngwaahịa Modem USB agbakwunyere.N'iji akwụkwọ a, a ga-akpọ ya DV110IE.
Njirimara ngwaahịa
➢ DOCSIS / EuroDOCSIS 3.0 kwadoro
➢ 8 mgbada x 4 ọwa jikọtara ọnụ
➢ Okpomọkụ siri ike
➢ Na-akwado njide Band zuru oke
➢ Njikọ RF: SMB maka DS na US jikọtara ọnụ
➢ Njikọ RF: MMCX maka DS na US dị iche
A na-enweta akara ngosi SPI, UART, GPIO site na Interface Signal
➢ Otu Gigabit Ethernet Port na-akwado mkparita uka akpaaka
➢ Standalone Mpụga Nchedo (Nhọrọ)
➢ Ihe mmetụta okpomọkụ n'ime ụgbọ (Nhọrọ)
➢ Ogo ike RF ziri ezi (+/- 1dB) na oke okpomọkụ niile
➢ agbakwunyere Spectrum Analyzer
➢ DOCSIS MIBs, SCTE HMS MIB na-akwado
➢ API mepere emepe yana usoro data maka ịnweta ngwa ndị ọzọ
➢ Nkwalite ngwanrọ site na netwọk HFC
➢ Obere ngwugwu nke PCBA\
The DV110IE bụ a isi modul nwere nnọọ obere ụkwụ ebipụta na mfe ike na ndị ọzọ HFC ngwaahịa.Ihe mgbochi sistemu dị ka n'okpuru:
Mpụga Nchekwa
A na-eji ihe nchekwa dị na mpụga iji hụ na sistemụ ahụ na-arụ ọrụ nke ọma.Firmware na-agba Watchdog ụkwụ otu oge ka CM ghara ịtọgharịa.Ọ bụrụ na enwere ihe adịghị mma na CM Firmware, mgbe ahụ ka oge ụfọdụ gasịrị (oge nche), CM ga-emegharị na-akpaghị aka.
Ngwa
➢ Transponder, dị ka ọkọnọ ike, Fiber Node, UPS, CATV Power
Vidiyo IP-igwefoto
➢ Ihe nrịbama dijitalụ
➢ Okporo ụzọ Wi-Fi Hotspot
➢ Mgbasa ozi mberede
➢ 4G LTE na 5G obere cell
➢ DVB-C ma ọ bụ ngwakọ STB agbakwunyere CM
Ngwa Smart City
➢ CATV/QAM/DOCSIS/HFC Ngwa na Ngwa
Kwado HMS MIBs
| 1 | SCTE 36 (HMS028R6) | Nkọwa SCTE-ROOT na scteHmsTree |
| 2 | SCTE 37 (HMS072R5) | ngalaba nke scteHmsTree |
| 3 | SCTE 38-1 (HMS026R12) | Njirimara Njirimara |
| 4 | SCTE 38-2 (HMS023R13) | mkpu Ihe ndị dị |
| 5 | SCTE 38-3 (HMS024R13) | ihe nkịtịAdminGroup na ihe nkịtịPhyAddress |
| 6 | SCTE 38-4 (HMS027R12) | psIdent ihe |
| 7 | SCTE 38-5 (HMS025R13) | ihe dị iche |
| 8 | SCTE 38-7 (HMS050R5) | transponderInterfaceBusIdent ihe |
| 9 | SCTE 38-10 (HMS115) | RF Amplifier MIB ihe |
| 10 | SCTE 25-1 | Ngwakọ Fiber Coax N'èzí nlekota ọnọdụ osisi |
Spectrum Analyzer: Isi atụmatụ
- Nyocha ugboro ugboro (5-1002 MHz)
- RBW ntọala
- Ihe nrịbama (Mgbe akpọchiri, Ọkwa ike / QAM / biputere BER / tupu BER / ọnụego akara)
- Ìgwè kpakpando
- Ọnụ ọgụgụ kasị elu/ Nkezi
- Njikere
- nkeji (dBm/dBmV/dBuV)
- Nosie larịị <-50 dBmV maka DS
- Ọkwa mkpọtụ <-20 dBmV maka US
Nka nka
| Nkwado Protocol | ||
| DOCSIS/EuroDOCSIS 1.1/2.0/3.0 SNMP v1/v2/v3 TR069 | ||
| Njikọta | ||
| RF | x1 SMB Njikọ maka jikọtara D/S na U/S (J1405) x2 MMCX Njikọ maka iche iche D/S (J1415) na U/S (J1416) | |
| RJ45 | 1 x RJ45 Ethernet ọdụ ụgbọ mmiri 10/100/1000 Mbps (J401) | |
| Interface mgbaàmà | Isi ihe ntụtụ, 2x10, 2.0mm, akụkụ aka nri (Nhọrọ) (J1410) Igbe nkụnye eji isi mee, 2x10, 2.0mm, akụkụ kwụ ọtọ (Nhọrọ) (J1413) Isi ihe ntụtụ, 2x10, 2.0mm, akụkụ kwụ ọtọ, nwoke (J1414) Nkọwa pin lee Tebụl #1 | |
| RF mgbada | ||
| Ugboro (ọnụ-ruo-ọnụ) | 88 ~ 1002 MHz (DOCSIS) 108 ~ 1002MHz (EuroDOCSIS) | |
| Bandwit ọwa | 6MHz (DOCSIS) 8MHz (EuroDOCSIS) 6/8MHz (Nchọpụta akpaaka, Ụdị ngwakọ) | |
| Mgbanwe | 64QAM, 256QAM | |
| Ọnụego data | Ruo 400Mbps site na njikọ ọwa 8 | |
| Ọkwa mgbaàmà | Docsis: -15 ruo +15dBmV Euro Docsis: -17 ruo +13dBmV (64QAM);-13 ruo +17dBmV (256QAM) | |
| RF n'elu
| ||
| Oke ugboro ugboro | 5 ~ 42MHz (DOCSIS) 5 ~ 65MHz (EuroDOCSIS) 5 ~ 85MHz (Nhọrọ) | |
| Mgbanwe | TDMA: QPSK,8QAM,16QAM,32QAM,64QAM S-CDMA: QPSK, 8QAM, 16QAM, 32QAM, 64QAM, 128QAM | |
| Ọnụego data | Ruo 108Mbps site na 4 Channel Bonding | |
| Ọkwa mmepụta RF | TDMA (32/64 QAM): +17 ~ +57dBmV TDMA (8/16 QAM): +17 ~ +58dBmV TDMA (QPSK): +17 ~ +61dBmV S-CDMA: +17 ~ +56dBmV | |
| Netwọk | ||
| Usoro netwọkụ | IP/TCP/UDP/ARP/ICMP/DHCP/TFTP/SNMP/HTTP/TR069/VPN (L2 na L3) | |
| Ntugharị | Ihe nkesa DNS / DHCP / RIP I na II | |
| Ịkekọrịta ịntanetị | Ihe nkesa NAT / NAPT / DHCP / DNS | |
| Ụdị SNMP | SNMP v1/v2/v3 | |
| Ihe nkesa DHCP | Ihe nkesa DHCP arụnyere n'ime ya iji kesaa adreesị IP na CPE site na ọdụ ụgbọ mmiri Ethernet CM | |
| Onye ahịa DCHP | CM na-enweta adreesị IP na DNS na-akpaghị aka site na sava MSO DHCP | |
| Mechanical | ||
| Ọnọdụ LED | x6 (PWR, DS, US, Online, LAN, RF ọkwa) | |
| Bọtịnụ nrụpụta ụlọ nrụpụta | x1 (SW401) | |
| Akụkụ | 65mm (W) x 110mm (H) x 17mm (D) | |
| Environmental | ||
| Ntinye ike | DC Jack (6.4mm/2.0mm) (CN6) Isi Wafer, 1x 2, 2.0mm, akụkụ aka nri.(Nhọrọ) (CN5) Na-akwado ntinye ike sara mbara: +5VDC ~ +24VDC | |
| Oriri ike | 12W (Max.) 7W (Ụdị) | |
| Okpomọkụ na-arụ ọrụ | Azụmahịa: 0 ~ +70 oC Ụlọ ọrụ mmepụta ihe: -40 ~ +85 oC | |
| Iru mmiri na-arụ ọrụ | 10 ~ 90% (anaghị ekpokọta ihe) | |
| Okpomọkụ nchekwa | -40 ~ +85oC | |
Ntụgharị mgbaàmà: Nkọwa ntụtụ (J1410, J1413, J1414)
| Port Pin | Nkọwa mgbaàmà | Ụdị mgbaàmà | Ọkwa mgbaàmà |
| 1 | SPI MOSI | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 2 | SPI elekere | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 3 | SPI MISO | Ntinye dijitalụ | 0 ruo 3.3VDC |
| 4 | DS LED (na-enwu mgbe ọ dị ala) | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 5 | Ala | Ntụaka | 0V |
| 6 | ONLINE LED (na-enwu mgbe ọ dị ala) | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 7 | US LED (na-enwu mgbe ọ dị ala) | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 8 | PWR LED (na-enwu mgbe ọ dị ala) | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 9 | SPI Chip Họrọ 1 | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 10 | SPI Chip Họrọ 2 | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 11 | GPIO_01 | Ojiji n'ọdịnihu | 0 ruo 3.3VDC |
| 12 | Ala | Ntụaka | 0V |
| 13 | Ala | Ntụaka | 0V |
| 14 | Kwanye aka n'ọdụ ụgbọ mmiri Serial | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 15 | Tọgharia (dị obere ọrụ) | Ntinye dijitalụ | 0 ka “Mepee” ma ọ bụ 3.3VDC |
| 16 | RF LEVEL Green LED (ọkụ mgbe ọ dị ala) | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 17 | GPIO_02 | Ojiji n'ọdịnihu | 0 ruo 3.3VDC |
| 18 | RF LEVEL Red LED (na-enwu mgbe ọ dị ala) | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 19 | Nyefee UART | Mpụta dijitalụ | 0 ruo 3.3VDC |
| 20 | UART nata | Mpụta dijitalụ | 0 ruo 3.3VDC |
J1410: ntụtụnkụnye eji isi mee, 2x10, 2.0mm, akụkụ aka nri.
J1413: Igbenkụnye eji isi mee, 2x10, 2.0mm, akuku kwụ ọtọ.
J1414: Pin nkụnye eji isi mee, 2x10, 2.0mm, kwụ ọtọ akụkụ.
J401: RJ45, w / o Transformer, w / LED abụọ, w / ọta, akụkụ aka nri
J1417: nkụnye eji isi mee, 1x8, 2.0mm, akụkụ aka nri.
SW401: Tọgharia bọtịnụ, SMD, akụkụ aka nri.
J1405: SMB, 75 OHM, DIP, akụkụ aka nri.Ngwakọta D/S na U/S RF Signal.
J1415, J1416: MMCX, 50 OHM, DIP, akụkụ aka nri.Nkewa D/S na U/S RF Signal.
CN5:nkụnye eji isi mee, 1x2, 2.0mm, akụkụ aka nri.Ndị mmadụ n'akụkụ ala PCB.
Pin1 - VIN
Pin2 - GND
CN6: DC Jack, OD=6.4mm/ID=2.0mm.Dakọtara DC Plug OD = 5.5mm/ID = 2.1mm
Akụkụ ọkụ ọkụ (Nkebi: mm)
Akụkụ PCBA (Nkebi: mm)
